收藏本站
AD7328
MODES OF OPERATION
The AD7328 has several modes of operation that are designed
to provide flexible power management options. These options
can be chosen to optimize the power dissipation/throughput
rate ratio for different application requirements. The mode of
operation of the AD7328 is controlled by the power management
bits, Bit PM1 and Bit PM0, in the control register as shown in
Table 11. The default mode is normal mode, where all internal
circuitry is fully powered up.
Rev. A | Page 28 of 36
The AD7328 remains fully powered up at the end of the con-
version if both PM1 and PM0 contain 0 in the control register.
To complete the conversion and access the conversion result
16 serial clock cycles are required. At the end of the conversion,
CS can idle either high or low until the next conversion.
Once the data transfer is complete, another conversion can be
initiated after the quiet time, t
QUIET
, has elapsed.
NORMAL MODE
(PM1 = PM0 = 0)
FULL SHUTDOWN MODE
(PM1 = PM0 = 1)
This mode is intended for the fastest throughput rate perfor-
mance with the AD7328 being fully powered up at all times.
Figure 48 shows the general operation of the AD7328 in
normal mode.
In this mode, all internal circuitry on the AD7328 is powered
down. The part retains information in the registers during full
shutdown. The AD7328 remains in full shutdown mode until
the power management bits, Bit PM1 and Bit PM0, in the control
register are changed.
CS
The conversion is initiated on the falling edge of
and-hold enters hold mode, as described in the Serial Interface
section. The data on the DIN line during the 16 SCLK transfer
is loaded into one of the on-chip registers if the write bit is set.
The register is selected by programming the register select bits
(see
Table 8).
, and the track-
A write to the control register with PM1 = PM0 = 1 places the
part into full shutdown mode. The AD7328 enters full shut-
down mode on the 15
th
SCLK rising edge once the control register
is updated.
1
16
3 CHANNEL I.D. BITS, SIGN BIT + CONVERSION RESULT
DATA INTO CONTROREGISTER
SCLK
CS
DOUT
DIN
0
If a write to the control register occurs while the part is in full
shutdown mode with the power management bits, Bit PM1 and
Bit PM0, set to 0 (normal mode), the part begins to power up
on the 15
th
SCLK rising edge once the control register is updated.
Figure 49 shows how the AD7328 is configured to exit full shut-
down mode. To ensure the AD7328 is fully powered up, t
POWER-UP
should elapse before the next CS falling edge.
Figure 48. Normal Mode
CS
1
16
1
SCLK
SDATA
DIN
16
INVALID DATA
CHANNEL IDENTIFIER BITS + CONVERSION RESULT
DATA INTO CONTROL REGISTER
DATA INTO CONTROL REGISTER
t
POWER-UP
THE PART IS FULLY POWERED UP
ONCE
POWER-UP
HAS ELAPSED
CONTROL REGISTER PM1 = 0, PM0 = 0
TO KEEP THE PART IN NORMAL MODE, LOAD PM1 = PM0 = 0
IN CONTROL REGISTER
Figure 49. Exiting Full Shutdown Mode
PART IS IN FULL
SHUTDOWN
PART BEGINS TO POWER UP ON THE 15TH
SCLK RISING EDGE AS PM1 = PM0 = 0
0
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVAL-AD73311LEB Low Cost, Low Power CMOS General Purpose Analog Front End
EVAL-AD73311EB Low Cost, Low Power CMOS General Purpose Analog Front End
EVAL-AD73311EZ Low Cost, Low Power CMOS General Purpose Analog Front End
EVAL-AD73322LEB Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
EVAL-AD73322EB EvaluationBoardforLowCost,LowPower, CMOSGerneralPurposeDualAnalogFrontEnd
EVAL-AD73322EZ Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
EVAL-AD73360LEB AD73360L Evaluation Board, Six Input Channel Analog Front End
EVAL-AD73360EB Six-Input Channel Analog Front End
相关代理商/技术参数
EVAL-AD7328SDZ 功能描述:BOARD EVAL FOR AD7328 RoHS:是 类别:编程器，开发系统 >> 评估板 - 模数转换器 (ADC) 系列:iCMOS® 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- ADC 的数量:1 位数:12 采样率（每秒）:94.4k 数据接口:USB 输入范围:±VREF/2 在以下条件下的电源（标准）:- 工作温度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，软件
EVAL-AD7329CB 制造商:Analog Devices 功能描述:
EVAL-AD7329CBZ 功能描述:BOARD EVALUATION FOR AD7329CBZ RoHS:是 类别:编程器，开发系统 >> 评估板 - 模数转换器 (ADC) 系列:iCMOS® 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- ADC 的数量:1 位数:12 采样率（每秒）:94.4k 数据接口:USB 输入范围:±VREF/2 在以下条件下的电源（标准）:- 工作温度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，软件
EVAL-AD73311EB 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power CMOS General Purpose Analog Front End
EVAL-AD73311EZ 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power CMOS General Purpose Analog Front End
EVAL-AD73311LEB 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power CMOS General Purpose Analog Front End
EVAL-AD73322EB 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
EVAL-AD73322EZ 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power CMOS General-Purpose Dual Analog Front End